Trimline Gutter / Trimform Gutter & Highline gutters & downpipes are designed to hang from a box profile sheet – coming as a 0.7mm thick steel, to match the roof or wall sheets. The inside leg of the gutter is fixed to the underside of the box profile sheet and a gutter arm is used to extend the crown for the sheet and support them outside of the trimline gutter edge.

Our gutter support arms come in 600mm in length and are made to suit the specific profile being used. Usually support arms are also spread 600mm apart along with the guttering.

Trimline / Trimform & Highline gutters are supplied 3m in length which are conjoined through internal butt straps – fixed using stitcher screws and mastic.  Stop ends care supplied loose and is handed dependant on which end is required for the project.

Trimline Gutter / Trimform Gutter & Highline gutters are designed to give you a shadow line effect to give you more of an enhanced look.

Available in various different colours and materials such as leather grain, HPS, Prisma (smooth) & Spectrum (smooth)

Does not require any fascia boards.

The post Trimline & Highline Gutters & Downpipes appeared first on Prestige Industrial Roofing Supplies.

Available in black and grey – the Brett Martin 170mm comes with pioneering ‘clip & seal’ technology for easy and efficient installation. The clip & seal fully combines with the fittings so that the designed captive seal is held securely within the fitting – whilst the clip locks the seal firmly in place.

For added ease the clip & seal is fully factory fitted but can also be easily removed if needed.

The drainage system durability has been fully tested to BS EN 1462 Load Class H standard.  Whilst it’s unique set-up provides long-term weather-ability for the systems gutter fittings and downpipes, all of which are covered by a 10 year colour warranty.

• The unique CLIP & SEAL fully integrates with the fitting so that the specially designed captive seal is held securely within the fitting whilst the clip locks the seal firmly in place.
• For added convenience the CLIP & SEAL is fully factory fitted to all Deeptyle170 fittings but can also be easily removed if required.
• When fitting the gutter the CLIP & SEAL provides just enough flex to allow the gutter to locate within the fitting, whilst a reassuring click locks the gutter securely into position compressing the seal for superior sealing.
• Compatible with 110mm Downpipe
• Available in black or grey

Downloads

Rainwater Brochure

170mm Deepstyle Brochure

The post Brett Martin 170mm Industrial Rainwater System appeared first on Prestige Industrial Roofing Supplies.

Our Brett Martin plastic domestic rainwater systems are suitable for all single storey and multi-storey buildings. With easy, quick, efficient installation, the plastic gutters and downpipes are an ideal product for the busy installer and come in an array of colours; allowing for the domestic water system to either stand out or blend in against the chosen building.

Downloads

Rainwater Brochure

The post Plastic Domestic Gutters appeared first on Prestige Industrial Roofing Supplies.

Our durable Alutech domestic metal gutters and downpipes are manufactured using marine-grade aluminium, ensuring a long life expectancy of 50+ years with minimal maintenance required. The robust nature of aluminium makes these metal gutters resistant to rust, corrosion, and harsh weather conditions, making them ideal for both residential and commercial buildings.

The Alutech metal gutter system is designed to be both functional and aesthetically pleasing. Our outstanding range of polyester powder-coated (PPC) gutters is available in an array of colours, allowing you to match the guttering system to your building’s exterior. This wide colour selection ensures that you can meet all architectural and aesthetic requirements. The PPC finish also offers long-lasting protection, enhancing the durability and appearance of the metal gutters.

With a standard 30% gloss finish (unless otherwise specified), these gutters not only protect your property but also provide a sleek, modern look. The smooth finish also makes the guttering easier to clean, further reducing maintenance efforts over time. For buildings located in coastal or industrial areas, the marine-grade aluminium offers additional resistance against corrosive environments, ensuring that the gutters and downpipes remain in top condition for decades.

In addition to gutters, Alutech’s domestic range includes durable aluminium downpipes, which efficiently channel rainwater from the roof to the ground, preventing water damage and leaks. Combined, the metal gutters and downpipes provide an effective and long-lasting drainage solution for any property.

Whether you’re looking for a stylish, durable, and low-maintenance solution for your home or business, our Alutech domestic metal gutter system is the ideal choice, ensuring reliable water management and long-term performance.

Downloads

Alutec Price List 2019

The post Domestic Aluminium Gutters & Downpipe appeared first on Prestige Industrial Roofing Supplies.

Our Brett Martin industrial downpipes are available in both black and grey in either 160mm round or 110mm round. Durable, low maintenance and cost effective, the Brett Martin industrial downpipes are best suited to commercial, industrial and agricultural buildings.

Downloads

Rainwater Brochure

170mm Deepstyle Brochure

The post Industrial Plastic 110mm & 160mm Downipes appeared first on Prestige Industrial Roofing Supplies.

Our membrane lined insulated gutters consist of a galvanised gutter bond, sandwiched between a bright white polyester soffit to match the internal lining of roof cladding.

As with galvanised gutters, all items such as stop ends, weirs and outlets can be supplied, as well as pre formed corner units.

These can be supplied in any shape you require.

The post Insulated Gutters appeared first on Prestige Industrial Roofing Supplies.

Our single skin galvanised gutters, manufactured from pre-galvanised steel sheets or aluminium come in a varying of sizes from 1.6mm to 3mm.

With the ability to be supplied in all shapes and sizes, all our single skin galvanised gutters have the option of coming as a precoated steel or being powder coated.

We are also able to provide welding for stop ends, outlets and overflow weirs into your gutter – alternatively we can supply loose to be fixed onsite, as all can be fixed through joggle jointed or butt strapped. We’re also able to weld outlets to a flat plate and can supply preformed corner units or sections to your requirements and for your ease.

These can be supplied in any shape you require.

The post Single Skin Galvanised Gutters appeared first on Prestige Industrial Roofing Supplies.